NO 1. Introduction to the machine
This machine is a new model developed by our company. It has a small footprint, fast speed and stability. It can fill 50 capsules per minute. It can fill a variety of cups, just replace the machine mold. It can be completed in 30 minutes. Servo-controlled spiral filling with a filling accuracy of ±0.1g. With a diluting function, the residual oxygen of the product can reach 5%, which can extend the shelf life of the coffee. The whole system is based on Schneider and developed with Internet of Things technology. It can use a computer/mobile phone to monitor or operate the machine online.
NO 2. Scope of application
Applicable to the weighing and filling of various granular, powder, liquid and other materials. Such as coffee powder, milk powder, soy milk powder, tea, instant powder, yogurt and other food materials.
NO 3. Main functions
1. Fully complete the packaging process, the machine covers a small area, easy to operate.
2, PLC control system, full display and real-time monitoring, and computer / mobile phone online operation.
3, automatic drop cup.
4. Automatic filling.
5, the automatic cup along the dust.
6, automatic film suction, release film.
7. Nitrogen flushing system, the nitrogen protection from the falling cup to the sealing process, the residual oxygen content of the product can reach 5%.
8, automatic sealing.
9, automatically out of the cup.
10. Automatically record the number of packaged products.
11, fault alarm shutdown prompt function.
12. The fuselage structure of the whole machine is made of 304 stainless steel material, which greatly improves the hygiene and safety of food.
NO 4. Machine operation
1. In manual operation: the corresponding switch of each station must be manually turned on.
2. During automatic operation: When the on-screen changeover switch arrow points to automatic, press the run button to start.
NO 5. Machine workflow
1: Drop the cup station, open the on-screen switch, the machine is turned on, and the cup is automatically dropped.
2: The cup inspection station, when it is automatic, after detecting the cup inside the mold, shift to the other stations below to work.
3: Filling station, open the screen feeding, feeding, vibrating switch, in the automatic, there is a cup inside the mold, it will automatically fill.
4: The suction station, mainly dust removal, opens the suction switch, which automatically removes the dust along the cup.
5: The film suction station, open the on-screen suction switch, it will automatically put the diaphragm on the edge of the cup.
6: Heat sealing station, open the on-screen heating and heat sealing switch, which seals the film between the cup and the heat.
7: Exit the cup station and open the cup switch on the screen. It will automatically put the finished product at the exit for packaging.
8: Mold inspection station, if there is something in the mold, this station detects the stop to ensure the safety of the cup.
NO 6. Machine technical parameters
Model: HCY-F1-D50
Food materials: grinding / coffee, tea, milk powder
Maximum speed: 3000 capsules / hour
Voltage: single phase 220V
Power: 1.5KW
Frequency: 50/60HZ
Air pressure supply: ≥0.6Mpa / 0.1m3 0.8Mpa
Machine weight: 300kg
Machine size: 600mm × 600mm × 1800mm
Other Products We Manufacture:
1. Paper Straw Making Machine
2. Blister Packing Machine
3. Automatic Cartoning Machine
4. Automatic oral/vial/ampoule Packing Production Line
5. Bundle machine
6. Blister-Card Packing Machine
7. Capsule Filling Machine
8. Soft Gel Encapsulation machine
9. Tablet Press Machine
10. Capsule/Tablet Counting Machine
11.Strip Packing Machine
12. Plastic Ampoule Filling and Sealing Machine
13. Sachet Filling and Sealing Machine
14. Tube Filling and Sealing Machine
15. Emulsifier Machine + tank
16. Labeling Machine
FAQ
Q1:Are you manufacturer or trading company?
A1: We are manufacturer with own factory and exporting department.
Q2: What's the lead time of your machine?
A2: Normally it's about 30~45 working days.
Q3: What's the payment terms?
A3: 30% deposit TT, 70% paid before shipment; or L/C, Western Union.
Q4: Can we check machine before order?
A4: Yes, welcome to visit our factory and check machine anytime.
Q5: Is it difficult to install the machine ?
Q5: For standard small machines, the machines will be packed with no take apart, it comes to you to be a complete machine; you just need to connect power and compressed air to machine, then begin to operate the machine.
For large size machines, we will take the machine apart, on condition that we do our best to keep the machine easy to assembly.
You will get videos and instructions about installation of machine from us.
Q6: Does the machine power voltage meet buyers' factory power source?
A6: We can do it as your request.
Audited Supplier 
){kind=link}